Cordless Detail Sander

$46.99 USD
$89.00 USD
คำนวณ ค่าขนส่ง เมื่อชำระเงิน
  • Worldwide shipping

  • Free returns

  • Carbon neutral

  • Secure payments

 
Detail sander working the edge of a printed part
Cordless Detail Sander

The Detail IsThe Whole Job.

A sander held like a pen, working the edge, the corner and the curve with 13,000 straight strokes a minute — not a spinning disc that grabs and digs.

+Linear strokes instead of rotary spin
+Interchangeable heads for flat, corner and curve
+Cordless, charged over USB Type-C
+Add a precision blade and it cuts the small stuff too
 

13,000

Strokes / Minute

Straight back and forth, at speed. That is what lets the head shave a surface down in even passes instead of spinning into it and taking a bite out of the corner you were trying to keep.

Motion

Shave, Don’t Grab

The difference is not speed. It is where the force goes. A rotary head pushes sideways into the work; a linear head pushes along it.

On The JobRotaryLinear
ControlWanders on contactTracks the line you set
RemovalGrabs, then digsTakes a little per pass
CornersStalls at the wallReaches into the angle
EdgesRounds them offKeeps the edge where it was

That is why this tool is for the last ten percent of the job — the seam, the fillet, the inside corner — where a bigger sander has already done all it can do.

The Tool

Steered With Your Fingertips

It is held like a pen, which changes how the work feels: you steer with fingertips instead of wrestling a body down onto a surface. For detail work, that is the whole difference between a clean edge and a gouged one.

Detail sander held in the hand, blade tip fitted

Tip changes without tools — pull one head, press the next one in, keep going.

 

Flat

Surfaces, seams and flats — the loose material comes off evenly, pass by pass.

 

Corner

Inside angles and tight joints that a round pad can never sit down in.

 

Curve

Fillets and rounded profiles, followed rather than flattened.

 

Point

Narrow slots, small defects and the one spot that needs touching up.

Blade tip carving a small detail
Key Features

What It Actually Does

Linear Reciprocating Motion

High-speed back-and-forth movement gives controlled removal, so detailed sanding stays manageable instead of turning into a fight with the tool.

Built For Fine Surface Work

Reaches narrow gaps, inside corners, curved surfaces, edges and complex shapes where a larger sander cannot be steered.

Interchangeable Head Shapes

Different head profiles let the same tool adapt to flat surfaces, curves, corners, narrow spaces and whatever else the job turns into.

Coarse To Fine Grits

Sandpaper options run from coarse to fine, so you can correct a surface and then finish it without changing tools between stages.

Reduced Vibration

A counterweight system cuts the vibration reaching your hand, which is what keeps the tip steady through a long detail pass.

Cordless Operation

No cord trailing across the bench. Move around the project, turn the work, keep going.

Optional Cutting Capability

With compatible precision saw blades fitted, the same tool makes small cuts — so trimming and sanding happen in one hand.

Where It Goes

The Jobs That Need A Tip, Not A Pad

01

Woodworking

Fillets, joints and the seam where two pieces meet, sanded after the big tools are done.

02

Model Making

Support marks, print lines and small defects on parts too small to hold against a spinning pad.

03

Surface Preparation

Scuffing and keying small areas before a finish goes on, without touching the surfaces around them.

04

Craft Finishing

Cleaning up a shape until the edge reads clean in the hand, one short pass at a time.

Specifications

The Numbers

Product Type

Cordless detail sander

Motion

Linear reciprocating

Maximum Speed

Up to 13,000 strokes/min

Sanding Heads

Multiple interchangeable profiles

Sandpaper Range

Coarse to fine grits

Applications

Woodworking, model making, surface preparation

Additional Function

Compatible with precision reciprocating saw blades

Charging

USB Type-C

In The Box

Everything To Start On A Detail

1 × Cordless Detail Sander 1 × Multi-Shape Sanding Head Set 1 × Basic Sandpaper Set 1 × Replacement Protection Parts 1 × USB Type-C Charging Cable 1 × User Manual
Saw blade fitted, small part clamped in a vise
Questions

Before You Start

01

Is this a sander or a cutter?

It is a sander first. With compatible precision saw blades fitted, it also handles small cutting jobs — the two share the same body.

02

What does linear motion actually change?

The head shaves along the surface instead of spinning into it. You get a controlled amount of removal per pass, and you can stop on the line you want.

03

Can it really get into corners and narrow gaps?

That is what the interchangeable heads are for. The corner profile sits into angles the flat pad cannot reach, and the point handles slots and single small defects.

04

How long does it run on a charge?

It charges over USB Type-C and runs cordless while you move around the project. Charge it between jobs and it is ready when the next detail comes up.

05

What kind of work is it for?

Woodworking details, model making, surface preparation and craft finishing — the last stage of a job, where the surface has to read clean in the hand.

06

Does it shake your hand apart?

A counterweight system is built in to cut the vibration reaching your hand. Long detail passes stay steady, which is where control actually comes from.

The last ten percent is the part people look at.

One tip, one pass, one clean edge — then move on to the next detail while the work is still in your hand.

Cordless Detail Sander · Linear Reciprocating · 13,000 Strokes/Min · USB Type-C